The substrate preparation for CVD diamond growth is of basic importance due to several reasons. A new molybdenum substrate preparation method, the aluminum oxide abrasion jetting, is introduced and compared with the traditional ones. Raman Scattering Spectroscopy (RSS) and Scanning Electron Microscopy (SEM) characterize CVD diamond films. CVD diamond films of good quality and uniformity were obtai

Following the upgrade of the LNLS injector system with the addition of a 500 MeV booster synchrotron, the storage ring in vacuum ferrite injection kicker magnets started to show overheating due the interaction with high frequency electromagnetic fields induced by the electron beam in large currents. In this paper, we describe the design of a new ceramic chamber for the kickers, which minimize this

We present the design of the vacuum chamber for the LNLS 2T Hybrid Wiggler. The chamber is a 3m long, 1.2mm thick 316L SS tube, which was mechanically pressed into an elliptical shape from an originally round tube. In order to provide the necessary mechanical tolerances, the rather flexible tube is welded to lateral supports that run the complete length of the chamber. Special care has been given

Proton-γ coincidences from (d,p) reactions between a Ni66 beam and a deuterated polyethylene target have been analyzed with the inverse-Oslo method to find the nuclear level density (NLD) and γ-ray strength function (γSF) of Ni67. The Ni66(n,γ) capture cross section has been calculated using the Hauser-Feshbach model in TALYS using the measured NLD and γSF as constraints. The results confirm that

A gliding arc discharge can be generated between two diverging electrodes and extended by a turbulent gas flow to form a plume of stable non-thermal plasmas sustained at atmospheric pressure. Gliding arc discharge is rather complicated since it involves plasma chemistry, flow dynamics and discharge-turbulence interaction. Optical techniques, especially laser-based methods, are able to perform in-s

A high spatiotemporal resolution technique for instantaneous flow field measurement has been developed, enabling one-dimensional velocimetry and flow field visualization within a converging–diverging nozzle. By employing femtosecond laser-induced long-lived, high-intensity plasma emission in a CO2/N2 gas flow, coupled with an ICCD camera, we achieved instantaneous one-dimensional velocity measurem

The combustion of aluminum powder enables a CO2-free generation of heat and electricity. To understand the asymmetric combustion of burning aluminum particles, we imaged light extinction and scattering with high speed and magnification. In the flame, particles melt, ignite, and build up a spherical flame sheet of condensed-phase alumina around the droplet. Shortly thereafter, the asymmetric stage

Purpose: This paper presents a reflection in memory and tribute to the work and life of Professor Barbara Czarniawska (1948–2024). Design/methodology/approach: We invited those colleagues whom we knew to be close to Barbara to submit reflections about her contributions to academia alongside their memories of her as a person. We present these reflections in the order we received them, and they have

BackgroundDiet diversity in early childhood promotes microbial diversity, influences the developing immune system, and has been linked to a reduced risk of immune-mediated diseases. This study aimed to determine the association between childhood diet diversity and later inflammatory bowel disease (IBD), for which data are limited.MethodsQuestionnaire data from the population-based birth cohorts Al

Lead-based piezoceramics are the dominant materials used in electronic devices, despite the known toxicity of lead. Developing safer piezoelectric materials has inspired the pursuit of lead-free piezoceramics, however some challenges remain in accessing these materials reproducibly. Here we demonstrate a simple and robust method for synthesis of the lead-free piezoceramic material, potassium sodiu

Children's outdoor play and access to nature are important for their health and development of environmental agency but there is a global decline of green spaces available to them. The aim is to explore the possibilities of creating nature-based outdoor settings for play and learning which benefit children as well as the wildlife and wider ecosystems. A fieldwork on developing nature based play se

The power take-off (PTO) system and control laws for wave energy converters (WECs) are crucial for system performance. Determining optimal PTO parameters based on different sea states is key for formulating control laws, identifying optimal WEC locations, and optimizing wave-to-wire performance. This study focuses on an oscillating water column (OWC) type WEC developed by Waves4Power using a buoy

We investigate alternative strategies against reference bias and postmortem damage in low coverage paleogenomes. Compared to alignment to the linear reference genome, we show that masking known polymorphic sites and graph alignment effectively remove reference bias, but only starting from raw read files. We next study approaches to overcome postmortem damage: trimming, rescaling, and our newly dev

Farmed Animal Sanctuaries, fristeder in Danish, are places devoted to previously farmed and abused animals. This chapter explores the transformative nature of caregiving within sanctuaries, navigating difficult political landscapes characterised by unrecognised care work and legal and hegemonic standards of care shaped by industrial practices. Based on ethnographic material collected at two sanctu

Distributed massive MIMO systems are expected to be part of the upcoming generation of wireless systems where joint communication and positioning opens the possibility of exploring new applications. In this work we investigate one of the various ways of deploying these kinds of systems, through the concept of Large Intelligent Surfaces (LISs). Although the concept of LISs is not completely novel,