Filetype
The behaviour of the stress intensity factor is investigated for a long plane crack with one tip interacting with a strip of graded elastic properties. The material outside the strip is postulated to be homogeneous linear elastic and the material in the graded region is assumed to have continuous change of modulus of elasticity. Changes of the Poisson’s ratio are ignored. The body is assumed to be
A special choice of two functions is proposed for analysing non-homogeneous materials, when both modulus of elasticity and Poisson’s ratio experience spatial variations. It is shown that in the case of abrupt change of the two basic material’s characteristics, these two functions degenerate to constants, which are linear combinations of Dundurs’ parameters. The properties of the two functions are
Crack growth across an interface between materials with different strength is examined by a cohesive zone model. The two materials have identical elastic properties but different fracture process properties, or different yield stresses, which is modeled by different cohesive stresses. The fracture criteria is a critical crack opening displacement. Load is represented by a stress intensity factor d
Using a dislocation simulation approach, the basic equation for a crack perpendicular to a bimaterial interface is formulated in this paper. A novel expansion method is proposed for solving the problem. The complete solution for the problem, including the T stress ahead of the crack tip and the stress intensity factors are presented. The stress field characteristics are analyzed in detail. It is fUsing a dislocation simulation approach, the basic equation for a crack perpendicular to a bimaterial interface is formulated in this paper. A novel expansion method is proposed for solving the problem. The complete solution for the problem, including the T stress ahead of the crack tip and the stress intensity factors are presented. The stress field characteristics are analyzed in detail. It is f
Small ligaments connecting the fracture surfaces just behind a moving crack front are assumed to exist under certain conditions. The ligaments are rapidly torn as the crack advances. Inelastic straining of such ligaments influences the energy balance in the fracture process. The rapid tearing of a single ligament is studied both numerically and experimentally. An elastic visco-plastic material modSmall ligaments connecting the fracture surfaces just behind a moving crack front are assumed to exist under certain conditions. The ligaments are rapidly torn as the crack advances. Inelastic straining of such ligaments influences the energy balance in the fracture process. The rapid tearing of a single ligament is studied both numerically and experimentally. An elastic visco-plastic material mod
A directional crack growth criterion in a compressed elastic perfectly plastic material is considered. The conditions at the crack-tip are evaluated for a straight stationary crack with a small incipient kink. Remote load is a combined hydrostatic pressure and pure shear applied via a boundary layer. Crack surfaces in contact are assumed to develop homogenous Coulomb friction. The crack opening diA directional crack growth criterion in a compressed elastic perfectly plastic material is considered. The conditions at the crack-tip are evaluated for a straight stationary crack with a small incipient kink. Remote load is a combined hydrostatic pressure and pure shear applied via a boundary layer. Crack surfaces in contact are assumed to develop homogenous Coulomb friction.The crack opening dis
A finite element analysis of a control rod blade consisting of B4C powder and stainless steel cladding has been performed using the ADINA program. An algorithm for finite element calculations of a porous material such as B4C powder has been developed. This algorithm describes both the swelling and consolidation behavior of B4C powder. The Gurson yield condition for isotropic porous media with caviA finite element analysis of a control rod blade consisting of B C powder and stainless steel cladding has been performed using the ADINA program. An algorithm for finite element calculations of a porous material such as BC powder has been developed. This algorithm describes both the swelling and consolidation behavior of BC powder. The Garson vield condition for isotropic porous medium with cavit
BACKGROUND: Fetal cardiovascular MRI complements ultrasound to assess fetal cardiovascular pathophysiology.PURPOSE: To develop a free-breathing method for retrospective fetal cine MRI using Doppler ultrasound (DUS) cardiac gating and tiny golden angle radial sampling (tyGRASP) for accelerated acquisition capable of detecting fetal movements for motion compensation.STUDY TYPE: Feasibility study.SUB
The control-rod elements in a boiling-water reactor contain natural boron carbide (B4C) powder, used as neutron-absorber material and clad in stainless-steel blades. During in-reactor service, the internal production of helium gas and point defects in neutron-irradiated boron carbide cause swelling which can induce significant contact stresses in the blade causing, eventually, stress-corrosion cra
BACKGROUND: Many individuals with late effects of polio have difficulties participating in daily activities. The Reintegration to Normal Living Index (RNL-I) is a self-report questionnaire that evaluates perceived participation, but knowledge of the test-retest reliability and measurement errors in this population is lacking.OBJECTIVE: To evaluate the test-retest reliability of the RNL-I in adults
The motion of pre-existing edge dislocations in an infinite linear elastic body is studied at initiation of crack growth and at quasi-static steady-state crack growth. Dislocation nucleation is assumed not to occur. Thus, the study concerns only dislocations that are present in the virgin material. A dislocation is assumed to glide if its driving force exceeds a critical value. Changes in dislocat
Small ligaments connecting the crack surfaces just behind the moving crack front are assumed to exist during fast cleavage crack growth. The production and conduction of heat during the process of tearing these ligaments are studied. The straining is computed by assuming an elastic visco-plastic material model. The produced heat during plastic work is calculated. Heat conduction is considered. TheSmall ligaments connecting the crack surfaces just behind the moving crack front are assumed to exist during fast cleavage crack growth. The production and conduction of heat during the process of tearing these ligaments are studied. The straining is computed by assuming an elastic visco-plastic material model. The produced heat during plastic work is calculated. Heat conduction is considered. The
Self-similar situations are idealized states often referred to in continuum mechanics. Such a situation is generally expected when the formulated problem only involves one significant length parameter. The state at a stationary or at a steadily moving concentrated load may be self-similar. In heat conductivity, the progressive phase transformation near a point-shaped heat source results in a self-Self‐similar situations are idealized states often referred to in continuum mechanics. Such a situation is generally expected when the formulated problem only involves one significant length parameter. The state at a stationary or at a steadily moving concentrated load may be self‐similar. In heat conductivity, the progressive phase transformation near a point‐shaped heat source results in a self‐
A crack perpendicular to, and initially with the tip on, a bimaterial interface is studied. An asymptotic analysis is performed and crack growth proceeds straight ahead at constant remote load. Mode I conditions and plane strain are assumed. The materials on both sides of the interface are elastic perfectly‐plastic with different elastic properties and the same yield stress. A finite element analy
The Chinese-led Asian Infrastructure Investment Bank (AIIB) started operation in January 2016 in the context of severe criticism from the U.S. government and transnational civil society organizations, but with the support from major Asian and European states. The establishment of this new global governance institution (GGI) raises intriguing questions concerning legitimacy and (de)legitimation. Wh
