Filtyp
This document presents a monitoring protocol to assess the overall performance of a lighting and/or daylighting retrofit of a building. This protocol covers four key aspects:1. Energy use;2. Retrofit costs;3. Photometric assessment;4. User assessment.This document develops each aspect in detail, presenting the required measurements and necessary equipment as well as providing guidelines for data a
This report presents the general lessons learned from the investigated 24 case studies from 10 countries.
Cation release rates to catchment runoff from chemical weathering were assessed using an integrated catchment model that included the soil's unsaturated, saturated and riparian zones. In-situ mineral dissolution rates were calculated in these zones as a function of pH, aluminum and dissolved organic carbon (DOC) concentrations along a hillslope in Northern Sweden where soil water was monitored ove
For drug delivery, characterization of liposomes regarding size, particle number concentrations, occurrence of low-sized liposome artefacts and drug encapsulation are of importance to understand their pharmacodynamic properties. In our study, we aimed to demonstrate the applicability of nano Electrospray Gas-Phase Electrophoretic Mobility Molecular Analyser (nES GEMMA) as a suitable technique for
Our knowledge of sports-related injuries in para-sport is limited and there are no data on how Paralympic athletes themselves perceive an injury. The aim of this qualitative study was to explore Paralympic athletes’ perceptions of their experiences of sports-related injuries, risk factors and preventive possibilities. Eighteen Swedish Paralympic athletes with vision impairment, intellectual impair
Using synchronized rapid video imaging and calibrated acoustic emission (AE) measurements, a direct correspondence is found between the length of emerging twin and its AE transient response during in-situ testing of Mg polycrystals. The detectability limit for twin nucleation in Mg and its alloys is evaluated to be as small as 0.3 µm or even less. It is shown that the use of appropriate calibratio
Non-contact surface wave measurements are performed on a new asphalt concrete (AC) pavement using 48 micro-electro-mechanical system (MEMS) sensors as receivers to estimate the real part of the dynamic moduli of the AC top layer. Laboratory measurements of core samples, extracted from the field measurement positions, are used to construct master curves for comparison with the field measurements. T
In the present work, multifunctional Ti-Si-N coatings have been deposited using CAVD method with the aim of studying their chemical, physical, structural and mechanical properties. Coatings of Ti-Si-N were modified by high-intensity ion implantation using copper ions with dose D = 2 × 1017 ions/cm2 and energy E = 60 keV. The results demonstrated that ion implantation has an effect on the grain siz
A precipitate evolution model based on classical nucleation, growth and coarsening theory is adapted and solved using the multi-class approach for the superalloy IN718. The model accounts for dissolution of precipitates and is implemented in a finite element program. The model is used to simulate precipitate evolution in the fused zone and the adjacent heat affected zone for a welding simulation.
Magnesium has been recently becoming an increasingly popular material for various applications. However, excessive chemical reactivity, and oxidation rate in particular, is a major obstruction on the way of Mg to become widely adopted. A significant problem causing the lack of Mg reactivity control is insufficient understanding of mechanisms involved in the oxidation of magnesium surface. Herewith
During the last decade it has been shown that severe plastic deformation (SPD) is a very effective for obtaining ultra-fine grained (UFG) and nanostructured materials. The basic SPD methods are High Pressure Torsion (HPT) and Equal Channel Angular Extrusion (ECAE). Recently several new methods have been developed: 3D deformation, Accumulative Roll Bonding, Constrained Groove Pressing, Repetitive C
Indoor lighting is facing a massive retrofit to LED lighting. Research is needed to assess whether LED-based lighting can promote energy efficiency, boost visual comfort and support biological functions. This field study considered the lighting of four identical classrooms in an upper secondary school in Helsingborg, Sweden. Two classrooms were fitted with state-of-the-art ceiling pendants contain
